Skip to main content

Farm irrigation systems in NZ: which type suits your farm?

November 17, 2026
4main systems

The main irrigation systems on New Zealand farms are centre pivots, lateral (linear) moves, travelling irrigators, and fixed or pod-style sprinklers. Which one suits your farm comes down to paddock shape, water supply, terrain and how much shifting you want to do.

Ray Mayne Hose & Fittings has been putting irrigation on Canterbury farms for over 35 years, and we supply and service most of the systems on this list. Here’s the honest run-down of each.

Centre pivot irrigation

A centre pivot is a line of sprinklers on wheeled towers that walks in a circle around a fixed centre point, watering as it goes. Pivots suit larger, open paddocks and are the backbone of dairy and arable irrigation across the Canterbury Plains.

Why farmers choose them: even watering, low labour once running, and modern controls that let you manage the machine from your phone. With variable rate irrigation (VRI) fitted, a pivot can put different amounts of water on different parts of the paddock – less on the gateways and races, more where the soil needs it.

We import and distribute Reinke centre pivots – Ray Mayne is the principal Reinke importer for New Zealand. (Reinke’s American brochures spell it “center pivot”; it’s the same machine.)

Lateral move irrigation

A lateral move is built like a pivot but travels in a straight line, so it waters a rectangle instead of a circle. That makes it the right machine for long, straight paddocks where a circle would leave too much dry ground in the corners.

Laterals need more careful management than pivots. The whole machine has to track straight, and the water supply has to travel with it.

How hose-fed laterals work: The machine drags its supply hose behind it and gets reconnected at hydrants along the run. With big 6-inch hose, that’s usually around every 130 to 140 metres – any more hose than that and it gets too heavy for the machine to pull.

That’s why design and setup matter more here than with any other system. Reinke builds lateral moves alongside its pivots, and we design, install and service them.

Travelling irrigators

A travelling irrigator is a machine that winches itself along a paddock, watering a strip as it goes, and then gets shifted to the next run. Travellers suit smaller or irregular paddocks, support blocks and farms that aren’t ready for the cost of a fixed machine.

We can supply TurboRain travelling irrigators as well as hard hose machines – just let us know what you need and we’ll source the right one for your block. For many farms a traveller is the first step into irrigation, and a well-serviced one keeps earning its keep for decades.

Fixed, pod and drip systems

Not every paddock suits a moving machine. Fixed sprinklers (solid set) put permanent sprinklers across the block, and they’re something we supply and install – from small blocks right up to large set-sprinkler jobs. We also supply and install stockwater systems.

Pod systems (like K-Line) are sprinkler pods you tow around with the farm bike, and drip and micro-irrigation deliver water straight to the root zone – those belong mainly in horticulture rather than pasture. If one of these is the better answer for your block, we’ll tell you straight.

How do you choose between them?

Choosing an irrigation system comes down to four questions:

1

Paddocks

What shape and size are your paddocks?

2

Water

How much water does your consent allow, and at what flow?

3

Terrain

What is your terrain doing?

4

Time

How much time do you want to spend shifting gear?

Get those four answers right and the system usually chooses itself.

Our design team walks the farm, maps it and sizes the options against your consent before recommending anything. And because we service everything we sell, with technicians on call through the irrigation season, the machine you buy keeps running when it matters most.

Talk to us about your farm

If you’re weighing up irrigation options anywhere in Canterbury or beyond, call the team in Ashburton or send us an enquiry. We’ll give you a straight answer about what suits your farm – even when the answer is the cheaper machine.

Send an enquiry